Cisco 836 Hardware Installation Manual page 46

Mounting the Router
If the CRWS home page does not appear when you enter the URL
Tip
http://10.10.10.1, test the connection between the PC and the router by doing the
following:
1.
2.
3.
4.
If you have no special configuration requirements, click the Router Setup link
Step 4
on the home page, and then click Easy Setup. (This may appear as Quick Setup
on some models.) Then, enter the username and password provided to you by
your Internet service provider, and click Apply.
If you need to configure special features such as Network Address Translation
Step 5
(NAT), click the appropriate links on the home page, and complete the
configuration screens.
Click the Password link on the home page, and set a password for the router.
Step 6
Click the Test Connection link on the home page, and allow the connection to be
Step 7
tested.
Cisco 836 Router and SOHO 96 Router Hardware Installation Guide
2-48
Check that the OK LED on the router is on, and check the cable connection
between the router and the PC.
If the CRWS home page still does not appear, verify that the web browser's
"work offline" option is disabled.
If the web page still does not appear, verify that your PC is automatically
configured to receive an IP address. Follow the instructions in the
Cisco Router Web Setup Troubleshooting Guide section, which is available on
Cisco.com.
If the PC is configured to automatically receive an IP address, but the web
page still does not appear, select Start/Run, type winipcfg in the Run
window, and examine the address in the IP address field. The address should
be in the format 10.10.10.X, in which X is a number that is equal to or greater
than 2; for example, 10.10.10.2, or 10.10.10.3. If the IP address is not in this
format, verify that an Ethernet adapter name is visible in the Adapter field. If
there is no name in the field, return to
Configuration" section on page 2-46
Then return to the "Using Cisco Router Web Setup to Configure the Router"
section on page 2-47, and complete the procedure.
Chapter 2
Step 3 in the "Checking the PC
and add TCP to the list of protocols.
Installation
78-15281-02