Features - Cisco 836 Hardware Installation Manual

Features

Features
Table 1-1 Summary of Cisco 836 and Cisco SOHO 96 Routers Features
Feature
10BASE-T/100BASE-T
Ethernet switch
ADSL over ISDN
(ADSLoISDN) port
Flash memory
ISDN S/T port
Synchronous dynamic
RAM (SDRAM)
Ease of installation
Cisco IOS software
Cisco Router Web Setup
LAN interface
Console port
Dying gasp
Cisco 836 Router and SOHO 96 Router Hardware Installation Guide
1-22
Table 1-1 summarizes the features of the Cisco 836 and Cisco SOHO 96 routers.
Description
Provides connection to 10BASE-T (10 Mbps) or 100BASE-T (100 Mbps)
Ethernet networks. Compatible with 10/100-Mbps devices.
Provides connection to an ADSL over ISDN network. Does not support
auto-switch function.
8 MB of Flash memory, with up to 16 MB of expandable Flash memory
on the Flash module.
Provides connection to ISDN service provider by using the dial backup
and the remote management functions for the router when main ADSL link
goes down.
32 MB of SDRAM on board.
Color-coded ports and cables reduce the chance of error.
Supports standard Cisco IOS software.
Provides a web-based software tool for basic router configuration.
Fully compliant with IEEE 802.3 and IEEE 802.3u. Automatic
MDI/MDIX crossover function eliminates the need for crossover cables.
Provides connection to a terminal or PC for troubleshooting and for
software configuration using a command-line interface (CLI). This port is
configured as a data communication equipment (DCE) port with a
hardware handshake.
Provides dying gasp function. If the router is going to lose power, this
function detects the situation and sends a signal to warn digital subscriber
line access multiplexers (DSLAMs) of the line drops.
Chapter 1 Product Overview
78-15281-02