Explanation Of Parts List Arrangement; Symbols And Abbreviations - Hobart Jet-Ex 5D Operation And Maintenance Manual

OM-2094 / Operation and Maintenance Manual
Jet-Ex 5D / Series 500285 / Generator Set
Section 3. Parts List

Explanation of Parts List Arrangement

1.
The parts list is arranged so that the illustration will appear on a left-hand page and the applicable parts
list will appear on the opposite right-hand page. Unless the list is unusually long, the user will be able to
look at the illustration and read the parts list without turning a page.

Symbols and Abbreviations

2.
The following is a list of symbols and abbreviations used in the parts list.
* - item not illustrated
A, or AMP - ampere
AC - alternating current
AR - as required
DC - direct current
Fig. - Figure
hd. - head
hex - hexagon
Hz - Hertz (cycles-per-second)
I.D. - inside diameter
IN - inch
kVA - kilovolt-ampere
uF - microfarad
No. - number
OM - Owners Manual
PRV - peak reverse voltage
PSI - pounds per square inch
Ref - reference (the item has been listed previously)
TM - Technical Manual
v - volt (when used as a prefix to a five-digit number, indicates vendor code)
NOTE: An item which does not reflect an index number is an assembly which is not illustrated in its
assembled state, or it is similar (right-hand, left-hand, top, etc.) to an item which is illustrated.
November 1, 2000
Revised 06/01
Chapter 4-3
Page 1