Device Technology; Technical Data - ABB AE/S 4.2 Product Manual

®
ABB i-bus EIB / KNX
2

Device technology

Fig. 1: Analogue Input AE/S4.2
2.1

Technical data

Power supply
Auxiliary voltage output
to supply the sensors
Inputs
Connections
Connecting terminals
Operating and display elements
4
Device technology
Analogue Input AE/S 4.2 is used to record analogue data. Four conventional
sensors can be connected to AE/S 4.2. The connection to the bus is
established using the enclosed bus connection terminal at the front of the
device. The device is ready for operation after connecting the mains voltage
of 115...230 V AC and the bus voltage. Analogue Input AE/S 4.2 is
parameterised using ETS2 V1.3 or higher.
– Bus voltage
– Power input, bus
– Mains voltage U
s
– Power consumption
– Power input, mains
– Leakage loss
– Nominal voltage U
n
– Nominal current I
n
– Number
– Input signal/resolution/accuracy
– Input resistance to voltage measurement > 50 kohm
– Input resistance to current measurement 260 ohm
– EIB / KNX
– Mains voltage
– Supply for the sensors
– Sensor inputs
– Screw terminals
– Tightening torque
– Programming LED
– Programming button
Table 1: Technical data part 1
21 ... 32 V DC
< 10 mA
115 ... 230 V AC (+ 10% – 15%), 50 / 60 Hz
Max. 11 W, at 230 V AC
80/40 mA, at 115/230 V AC
Max. 3 W, at 230 V AC
24 V DC
300 mA
4 independent sensor inputs
0 – 1 V / 1 mV / +/– 2% of the upper limit
of the effective range (of ULE)
0 – 5 V / 5 mV / +/– 2% of ULE
0 – 10 V / 10 mV / +/– 2% of ULE
1 – 10 V / 10 mV / +/– 2% of ULE
0 – 20 mA / 20 μA / +/– 2% of ULE
4 – 20 mA / 20 μA / +/– 2% of ULE
0 – 1000 ohm resistance / 2.5 ohm /
+/– 2% of ULE
PT100 2-conductor technology
– 30...+ 70 °C / 0.1 K / +/– 1 K of ULE
PT100 2-conductor technology
– 200...+ 800 °C / 1.5 K / +/– 10 K of ULE
Floating contact interrogation
(pulse width min. 100 ms)
Via bus connection terminal, screwless
Via screw terminals
Via screw terminals
Via screw terminals
2
0,2 ... 2,5 mm finely stranded
2
0,2 ... 4,0 mm single-core
Max. 0.6 Nm
For assigning the physical address
For assigning the physical address