Parameter Window "Channel A - Floating Contact Interrogation - ABB AE/S 4.2 Product Manual

®
ABB i-bus EIB / KNX
3.2.3 Parameter window
"Channel A – Floating
contact interrogation"
22
Commissioning
Fig. 15: Parameter window "Channel A – Floating contact interrogation"
Use channel
Options: no/yes
This parameter determines the use of channel A.
Sensor output
Options: 0 – 1 V/0 – 5 V/0 – 10 V/1 – 10 V
0 – 20 mA/4 – 20 mA/0 – 1000 ohm/
Floating contact interrogation /
PT100 2-conductor technology – 30...+ 70 °C/
PT100 2-conductor technology – 200...+ 800 °C
This parameter is used to set the Sensor output.
The data can be found in the technical documentation of the sensor
manufacturer.
Note: The minimum pulse width is 100 ms.
Signal ON upon contact
Options: closed/open
This parameter is used to set the contact setting during the ON signal.
Option closed = Contact closed during ON signal
Option open = Contact open during ON signal
Output value is sent as
This parameter is fixed as 1 bit.
Bit value "0" = OFF signal
Bit value "1" = ON signal