Parameter Window "A - Threshold 1 - ABB AE/S 4.2 Product Manual

®
ABB i-bus EIB / KNX
3.2.2.3 Parameter window
"A – Threshold 1"
18
Commissioning
The following section describes the parameters for threshold 1. These also
apply to threshold 2.
Fig. 13: Parameter window "Channel A – Threshold 1"
Use threshold value
Options: no/yes
This parameter is used to define whether Threshold 1 should be used.
If yes is selected, the "Threshold value – Channel A Threshold 1"
communication object appears.
Tolerance band lower limit
Tolerance band upper limit
Options: Dependent on the "Send value as" parameter in the
"Channel A" parameter window
These two parameters are used to set the upper and lower limit.
Note: Different limits are predefined, depending on the setting
for the "Send value as" parameter in the "Channel A"
parameter window.