Cisco 2800 Series Manual page 163

Hoot and Holler over V3PN Configuration Example
local crypto endpt.: 10.32.152.26, remote crypto endpt.: 10.32.150.46
path mtu 1420, media mtu 1420
current outbound spi: D3C362F0
inbound esp sas:
spi: 0x4589EBE8(1166666728)
spi: 0xC172073D(3245475645)
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x2A87D473(713544819)
spi: 0xD3C362F0(3552797424)
outbound ah sas:
outbound pcp sas:
The following is an output example for the show ip ospf neighbors command, performed using the
configuration on the Headquarters router:
HUB-R1# show ip ospf neighbor
Neighbor ID
192.168.7.1
192.168.5.1
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
slot: 0, conn id: 5219, flow_id: 99, crypto map: INT_CM
crypto engine type: Hardware, engine_id: 2
sa timing: remaining key lifetime (k/sec): (528510577/14263)
ike_cookies: 59F8CBF0 5B2E8553 7D356DD4 F5DE05AD
IV size: 8 bytes
replay detection support: Y
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
slot: 0, conn id: 5221, flow_id: 101, crypto map: INT_CM
crypto engine type: Hardware, engine_id: 2
sa timing: remaining key lifetime (k/sec): (522107974/14262)
ike_cookies: 59F8CBF0 5B2E8553 7D356DD4 F5DE05AD
IV size: 8 bytes
replay detection support: Y
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
slot: 0, conn id: 5220, flow_id: 100, crypto map: INT_CM
crypto engine type: Hardware, engine_id: 2
sa timing: remaining key lifetime (k/sec): (528510577/14262)
ike_cookies: 59F8CBF0 5B2E8553 7D356DD4 F5DE05AD
IV size: 8 bytes
replay detection support: Y
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
slot: 0, conn id: 5222, flow_id: 102, crypto map: INT_CM
crypto engine type: Hardware, engine_id: 2
sa timing: remaining key lifetime (k/sec): (522107953/14261)
ike_cookies: 59F8CBF0 5B2E8553 7D356DD4 F5DE05AD
IV size: 8 bytes
replay detection support: Y
Pri State
0 FULL/ -
0 FULL/ -
Dead Time Address
00:00:39 192.168.2.1
00:00:36 192.168.3.1
Verify
Interface
Tunnel1
Tunnel0
OL-6573-01
23