Preparing Wireless Antennas (Wireless Connection); Plugging In The Power Cable - Yamaha HTR-6072 Owner's Manual

Preparing wireless antennas (wireless connection)

Stand the wireless antennas upright for connecting to the wireless network or a
Bluetooth device wirelessly.
For information on how to connect the unit to a wireless network, see the following:
• "Preparing for connecting to a network" (p.29)
Notice
▪ Do not apply excessive force on the wireless antenna. Doing so may damage the antenna.
6

Plugging in the power cable

(Taiwan, Brazil and Central and South America models only)
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall
outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential
fire hazard.
Before plugging in the power cable
Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–
120/220–240 V, 50/60 Hz.
The unit (rear)
(TV)
After all the connections are complete, plug in the power cable.
The unit (rear)
(TV)
30
En
Plugging in the power cable
Warning
To an AC wall outlet
VOLTAGE SELECTOR