Selecting The Hdmi 4K Signal Format (4K Mode); Setting Dts Format Notification (Dts Mode) - Yamaha HTR-6072 Owner's Manual

Selecting the HDMI 4K signal format (4K MODE)

LINK MASTER STEREO TUNED ZONE
SLEEP PARTY 2 A
OUT 2 Hi -R es ENHANCER YPAO VOL. A- DRC
ECO
4K MODE•MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
ADVANCED SETUP menu
"4K MODE"
Settings
Inputs/outputs 4K signals shown in the following table. Depending on the
MODE 1 connected device or HDMI cables, video may not be displayed correctly.
In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K signals shown in the following table.
Note
When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
Format
RGB 4:4:4
YCbCr 4:4:4
4K/60, 50 Hz
YCbCr 4:2:2
YCbCr 4:2:0
RGB 4:4:4
4K/30, 25, 24 Hz YCbCr 4:4:4
YCbCr 4:2:2
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
MODE 1 MODE 2
8 bit 10 bit 12 bit 8 bit 10 bit
– –
4
– –
4
–
4
4 4
4 4
4 4
4 4

Setting DTS Format Notification (DTS MODE)

LINK MASTER
OUT 2
ECO
DTS MODE•MODE1
This setting informs the BD player about the DTS formats that the unit supports.
ADVANCED SETUP menu
"DTS MODE"
Settings
This mode conforms to the DTS:X standard.
MODE 1
Use this setting under normal circumstances.
Use this setting if the BD player fails to properly output a DTS signal even
MODE 2
when it is playing back DTS-HD or DTS:X content.
12 bit
–
–
–
107
En
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -R es ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR