Yamaha HTR-6072 Owner's Manual page 80

Menu Item
DSP Parameter
Lipsync
Sound Dialogue
Volume
Auto Power Standby
ECO
ECO Mode
Input Rename
Input Skip
Function Dimmer
Memory Guard
Remote Color Key
Information
Network Connection
IP Address
MAC Address Filter
DMC Control
Network
Network Standby
Network Name
MusicCast Link Power Interlock
Network Update
Function
Center Spread Selects whether to spread the center channel signals to left and right when a 2-channel source is played.
Center Image Adjusts the center localization (broadening effect) of the front sound field.
Monaural Mix Enables/disables monaural sound output.
Selects the method to adjust the delay between video and audio output.
Select
Adjustment Adjusts the delay between video and audio output manually.
Dialogue Level Adjusts the volume of dialogue sounds.
DTS Dialogue Control Adjusts the volume of dialogue sounds for DTS content.
Dialogue Lift Adjusts the perceived height of dialogue sounds for the screen position.
Scale Switches the scale of the volume display.
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Max Volume Sets the limit value of the volume.
Initial Volume Sets the initial volume for when this receiver is turned on.
Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A.
ZoneB Volume
Set the amount of time for the auto-standby function.
Enables/disables the eco mode (power saving mode).
Changes the input source name displayed on the front display.
Set which input sources are skipped when operating the INPUT key.
Adjusts the brightness of the front display.
Prevents accidental changes to the settings.
Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.
Displays the network information of the unit.
Selects the network connection method.
Configures the network parameters (such as IP address).
Sets the MAC address filter to limit access to the unit from other network devices.
Selects whether to allow a Digital Media Controller (DMC) to control playback.
Selects whether to enable/disable the function that turns on the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the
power of other devices of the network.
Updates the firmware via the network.
80
En
Page
p.91
p.91
p.91
p.91
p.92
p.92
p.92
p.93
p.93
p.93
p.94
p.94
p.94
p.95
p.95
p.96
p.97
p.97
p.97
p.98
p.99
p.99
p.99
p.100
p.101
p.101
p.102
p.102
p.102