Product Overview; Installation Overview - STEINEL IS D360-120 Installation Instructions Manual

2
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate
electrical codes and regulations
• Installation by a qualifi ed electrician is recommended

Installation Overview

In this package
• IS D360-120 occupancy
sensor (switching module and
sensor module)
• Masking shrouds
• Fitting frame and securing
spring
• Installation instructions
Applications
• Fixture mounting in offi ces,
conference rooms, vestibules
and break rooms
www.steinel.net
(800) 852-4343
WARNING
Needed for installation
• 2 7/8 inch (73 mm) hole saw
• Wire nuts
Intended uses
• The sensor is intended to be
mounted directly to a lighting
fi xture or other listed enclosure
for the automatic switching of
lights.

Product Overview

120
PIR
VAC
IP20
Product description
The STEINEL IS D360-120 is a
highly accurate fi xture mount
occupancy sensor for indoor
use. The sensor's dimensions
are the same as those of a
MR16 lamp and fi t commercially
available MR16 fi tting frames.
The sensors use passive infrared
(PIR) technology to turn lighting ON
and off based on occupancy and
light levels.
www.steinel.net
(800) 852-4343
3