Feature Information For Mpls Point-To-Multipoint Traffic Engineering - Cisco ASR 920 Series Configuration

MPLS Point-to-Multipoint Traffic Engineering
RFCs
RFCs
No new or modified RFCs are supported by this
feature, and support for existing RFCs has not been
modified by this feature.
Technical Assistance
Description
The Cisco Support and Documentation website
provides online resources to download documentation,
software, and tools. Use these resources to install and
configure the software and to troubleshoot and resolve
technical issues with Cisco products and technologies.
Access to most tools on the Cisco Support and
Documentation website requires a Cisco.com user ID
and password.
Feature Information for MPLS Point-to-Multipoint Traffic
Engineering
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 2: Feature Information for MPLS Point-to-Multipoint Traffic Engineering
Feature Name
MPLS Point-to-Multipoint Traffic
Engineering
MPLS Traffic Engineering Path Calculation and Setup Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR

Feature Information for MPLS Point-to-Multipoint Traffic Engineering

Title
--
Link
http://www.cisco.com/cisco/web/support/index.html
Releases
Cisco IOS XE Release 3.15.0S
Feature Information
This feature was introduced on the
Cisco ASR 920 Series Aggregation
Services Router
(ASR-920-12CZ-A,
ASR-920-12CZ-D,
ASR-920-4SZ-A,
ASR-920-4SZ-D,
ASR-920-10SZ-PD,
ASR-920-24SZ-IM,
ASR-920-24SZ-M,
ASR-920-24TZ-M) .
920 Series)
39