Additional References - Cisco ASR 920 Series Configuration

Additional References

ip address 172.16.0.0 255.255.255.254
ip router isis
mpls traffic-eng tunnels
isis network point-to-point
ip rsvp bandwidth percent 100
!
router isis
net 49.0001.1720.1625.5001.00
is-type level-2-only
metric-style wide
passive-interface Loopback0
mpls traffic-eng router-id Loopback0
mpls traffic-eng level-2
!
!
ip classless
!
no ip http server
!
ip multicast mpls traffic-eng
ip pim ssm default
ip mroute 192.168.5.0 255.255.255.0 172.16.255.5
Additional References
Related Documents
Related Topic
Cisco IOS commands
MPLS TE command descriptions
Standards
Standards
No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.
MIBs
MIBs
No new or modified MIBs are supported by this
feature, and support for existing MIBs has not been
modified by this feature.
MPLS Traffic Engineering Path Calculation and Setup Configuration Guide, Cisco IOS XE Release 3S (Cisco
ASR 920 Series)
38
MPLS Point-to-Multipoint Traffic Engineering
Document Title
Cisco IOS Master Commands List, All Releases
Cisco IOS Multiprotocol Label Switching Command
Reference
Title
--
MIBs Link
To locate and download MIBs for selected platforms,
Cisco software releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs