Table of Contents
Advertisement
Table 18:
The Basic: Port Triggering Screen (continued)
Timeout (ms)
Twoway Status
Status
Manage
Action
Add Rule
Save Changes
Help
4.5.1
Adding or Editing a Port Triggering Rule
To add a new port triggering rule, click Add in the Basic > Port Triggering
screen.
To edit an existing port triggering rule, select the rule's radio button in the Basic
> Port Triggering screen and click the Edit button.
NOTE:
Ensure that Enabled is selected in the Basic > Port Triggering screen in
order to add or edit port triggering rules.
The following screen displays.
74
74
Version 1.0, 11/2016. Copyright
Version 1.0, 11/2016. Copyright
Hitron CODA-4x8x User's Guide
This displays the time (in milliseconds) after the CODA-
4x8x opens the Target ports that it should close them.
Usually a port triggering rule works for two IP
addresses; when a rule is enabled, other IPs will also be
allowed to use the rule as a trigger.
Use this field to turn the rule On or Off.
Click this to make changes to the rule.
Use this to delete the rule.
Click this to define a new port forwarding rule. See
Adding or Editing a Port Forwarding Rule
information on the screen that displays.
Click this to save your changes to the fields in this
screen.
Click this to see information about the fields in this
screen.
on page
2012 Hitron Technologies
2016 Hitron Technologies
71
for
Advertisement
Table of Contents
