Table 2: Hardware Connections - Hitron CODA-4*8 Series DOCSIS User Manual

Table 2: Hardware Connections
WPS
USB
17 17
Version 1.0, 11/2016. Copyright
Version 1.0, 11/2016. Copyright
Hitron CODA-4x8x User's Guide
Press this button to begin the WiFi Protected Setup
(WPS) Push-Button Configuration (PBC) procedure.
Press the PBC button on your wireless clients in the
coverage area within two minutes to enable them to join
the wireless network.
The WPS LED displays WiFi Protected Setup
connection status as follows:
Bi-color, blinking: the WPS connection is

processing.
Green, steady: the WPS connection has been

successful.
Red, steady: the WPS connection has failed, or an

error has occurred.
Off: WPS is not active.

See WPS on page 86
Use this port to plug in USB flash disks for mounting and
sharing through the LAN interfaces via the Samba
protocol (network neighborhood).
The CODA-4x8x supports the following Windows file
systems:
FAT16

FAT32


USB devices must not drain more than 500mA
from the USB port. USB devices requiring
more than 500mA should be provided with
their own power source(s).
for more information.
2012 Hitron Technologies
2016 Hitron Technologies