Hitron CODA-4*8 Series DOCSIS User Manual page 67

Table 14: The Basic: LAN Setup Screen (continued)
DHCP Start IP
DHCP End IP
Save Changes
Cancel
Help
Connected Computers
Host Name
IP Address
MAC Address
Type
Interface
Status
Refresh
67 67
Version 1.0, 11/2016. Copyright
Version 1.0, 11/2016. Copyright
Hitron CODA-4x8x User's Guide
Use this field to specify the IP address at which the
CODA-4x8x begins assigning IP addresses to devices
on the LAN (when DHCP is enabled).
Use this field to specify the IP address at which the
CODA-4x8x stops assigning IP addresses to devices on
the LAN (when DHCP is enabled).
NOTE: Devices requesting IP addresses once the
DHCP pool is exhausted are not assigned an IP
address.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
This displays the name of each network device
connected on the LAN.
This displays the IP address of each network device
connected on the LAN.
This displays the Media Access Control (MAC) address
of each network device connected on the LAN.
This displays whether the device's IP address was
assigned by DHCP (DHCP-IP), or self-assigned.
This displays whether the device is connected on the
LAN (Ethernet) or the WLAN (Wireless(x), where x
denotes the wireless mode; b, g or n).
This displays Active when the connected computer is
online, and Inactive when the connected computer is
offline.
Click this to refresh the information in this section.
2012 Hitron Technologies
2016 Hitron Technologies