Hitron CODA-4*8 Series DOCSIS User Manual page 94

Table 24: The Wireless: Basic Settings: 5G Screen (continued)
Wireless Mode
Channel Bandwidth
Wireless Channel
94 94
Version 1.0, 11/2016. Copyright
Version 1.0, 11/2016. Copyright
Hitron CODA-4x8x User's Guide
Select the type of 5GHz wireless network that you want
to use:
802.11a only: use IEEE 802.11a.

802.11n only: use IEEE 802.11n.

802.11a/n mixed: allow clients using both IEEE

802.11a and IEEE 802.11n to access the network.
802.11ac only: use IEEE 802.11ac.

802.11a/n/ac mixed (default): allow clients using

and of IEEE 802.11n, IEEE 802.11ac, or IEEE
802.11a to access the network.
NOTE: Only wireless clients that support the network
protocol you select can connect to the wireless
network. If in doubt, use 802.11n/ac Mixed
(default).
Use this field to configure the width of the radio channel
the CODA-4x8x uses to communicate with its wireless
clients on the 5GHz network. Using the full 80MHz
bandwidth can double your data speed, in comparison
to the 40MHz bandwidth.
Select 20 MHz to only use a 20 megahertz band.

Select 40 MHz to use a 40 megahertz band (only

clients supporting IEEE 802.11n and IEEE
802.11ac may connect).
Select 80 MHz to use an 80 megahertz band (only

clients supporting IEEE 802.11ac may connect).
Select the 5GHz wireless channel that you want to use,
or select Auto to have the CODA-4x8x select the
optimum channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
Click the Refresh button (
recheck the current wireless network conditions and
select the optimum 5GHz wireless channel afresh (see
Automatic Channel Selection
) to have the CODA-4x8x
on page 83).
2012 Hitron Technologies
2016 Hitron Technologies