Adding Or Editing A Port Triggering Rule - Hitron CGNM-2250 User Manual

Table 20: The Basic: Port Triggering Screen (continued)
Twoway Status
Status
Manage
Action
Add Rule
Save Changes
Help
4.5.1

Adding or Editing a Port Triggering Rule

To add a new port triggering rule, click Add Rule in the Basic > Port Triggering
screen.
To edit an existing port triggering rule, click Manage in the Basic > Port
Triggering screen.
NOTE: Ensure that Enabled is selected in the Basic > Port Triggering screen in
order to add or edit port triggering rules.
The following screen displays.
65 65
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
Usually a port triggering rule works for two IP
addresses; when a rule is enabled, other IPs will also be
allowed to use the rule as a trigger.
Use this field to turn the rule On or Off.
Use this field to Edit a port triggering rule.
Use this field to Delete a port triggering rule.
Click this to define a new port triggering rule. Port
triggering must first be set to Enabled. See
Editing a Port Triggering Rule
information on the screen that displays.
Click this to save your changes to the fields in this
screen.
Click this to see information about the fields in this
screen.
Adding or
on page 65 for
2012 Hitron Technologies
2014 Hitron Technologies
BASIC