Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 28:
The Wireless: ATF Screen
2.4G
5G
ATF Enable
ATF Policy
SSID-based Airtime
Allocation
Save Changes
104
104
Version 1.0, 11/2016. Copyright
Version 1.0, 11/2016. Copyright
Hitron CODA-4x8x User's Guide
Use this to configure ATF settings for the 2.4GHz
wireless network, or the 5GHz wireless network.
Click 2.4G to configure ATF settings for the 2.4GHz
wireless network.
Click 5G to configure ATF settings for the 5GHz
wireless network.
NOTE:
The fields that display in the 2.4GHz and the
5GHz screens are identical.
Use this to turn ATF on or off for the relevant wireless
network.
Click Enable to turn ATF on for the relevant
wireless network.
Click Disable to turn ATF off for the relevant
wireless network.
Use this to determine what the CODA-4x8x does with
unused airtime (based on the settings you configure in
Configuring Airtime Allocation Policy
Airtime is unused when an SSID's resource usage does
not reach the limit you assigned it; unused airtime can
therefore be assigned to other SSIDs that may require
it.
Select Restrict to ensure that SSIDs receive no
more than the percentage of resources you
assigned them. Unused airtime is not reassigned.
Select Fair to evenly distribute unused airtime
amongst SSIDs whose traffic has exceeded the
percentage of resources you assigned them.
Use this to configure the percentage of available
wireless transmission resources that should be
assigned to each of the CODA-4x8x's wireless SSIDs.
See
Configuring Airtime Allocation Policy
Click this to save your changes to the fields in this
screen.
on page 105).
on page 105.
2012 Hitron Technologies
2016 Hitron Technologies
Advertisement
Table of Contents
