Table of Contents
Advertisement
Installing BCDB
1
Position the BCDB so that the cable connectors face the FPDB.
2
Locate the HTPB connector at the bottom left of the BCDB and connect the HTPB cable.
3
Angle the rear of the BCDB so that it can be inserted behind the FPDB until it is seated in the rear cabinet cage. During the course of
the installation, make sure the BCDB does not come in contact with the FPDB assembly to prevent damage to either component.
4
Rotate the front of the BCDB towards the rear cabinet. Make sure the keyholes on the BCDB are aligned with the posts on the rear
cabinet cage.
Figure 76. Connecting an HTPB cable and installing a BCDB
A HTPB cable connector
5
Once the BCDB is seated in the rear cabinet cage, slide it down to engage the posts through the keyholes. All three posts are must be
visible through the keyholes to ensure the BCDB is properly seated.
6
Secure the BCDB with the screw.
Installation and Service Manual
Installing and removing system components
117
Advertisement
Table of Contents
