Table of Contents
Advertisement
3
Remove the screws securing the FPDB.
4
Remove the FPDB.
Figure 69. Removing the FPDB
Installing FPDB
1
Align the FPDB with the fan board bracket and install. Make sure the connectors are facing outward as seen in the following figure.
2
Secure the FPDB with screws.
Figure 70. Installing the FPDB
Table 35. Assembly material
Description
A: 6-32_STEP
B: 6-32_4-5_SCREW
3
Align the hooks on the FPDB assembly with the slots on the rear cabinet base.
4
Slide the FPDB assembly to install.
5
Secure the FPDB assembly with screws.
Quantity
2
2
Installing and removing system components
Torque (lbs/inch)
8 ± 0.5
8 ± 0.5
Installation and Service Manual
107
Advertisement
Table of Contents
