How To Set In Controltl System - Sekonic LITEMASTER PRO L-478DR Operating Manual

2-1-2. How to set in ControlTL System

1) Touch the Tool Box icon (
screen to display the Tool Box screen. Then touch [Radio CH/Zone] to display the
Radio CH/Zone Setting screen.
2) Touch the [Radio CH/Zone] to display the Radio CH/Zone Setting screen.
3) Touch the CTL tab for ControlTL Channel and Zones selection.
4) Touch the arrows ▲/▼ or slide your finger over the screen to select Channel from 1
to 20 for FCC & IC, or from 1 to 3 for CE version.
5) Touch one or more Zones (A, B, C) to select the flash units you want to use.
* Zones to use can be selected from Power Control screen as well.
6) Touch [OK] to confirm settings and then return to the Measuring screen. (Touch
[Cancel] to cancel settings to go back to the Measuring screen without change).
Measuring screen
•
S et both the meter and plug-in external or built-in PocketWizard receivers to the same ControlTL system.
•
T he last selected Zones in either Power Control screen or Radio CH/Zone Setting screen in Tool Box are activated in
Measuring screen.
) at the bottom of the bottom right of the Measuring
Tool Box screen (When ControlTL system is selected)
7
Radio CH/Zone Setting screen
Channel numbers
CTL tab
Zones