Sharp MX-B455W Troubleshooting Manual page 5

General Problems
Placing the original and adding paper
Is the original placed correctly?
●
Automatic Document Feeder
Do not exceed the
indicator line
Check if the size of the original you placed matches the
original size shown on the touch panel.
●
Document glass
Place the original in the back left corner.
If the original has a fold, straighten the fold before
placing. (This prevents original misfeeds.)
Check if the size of the original you placed matches
the original size shown on the touch panel.
Is the paper loaded correctly?
●
Paper tray
Fan the paper well before
loading it.
A4
A6
Align the edges and place
face up
Insert all the way in
Adjust to the original size
Mark
Platen
Scale
Set the guides to
the size of the
paper.
The paper must not exceed
the maximum number of
sheets and must not be higher
than the indicator line.
When loading A4 size paper in tray
1, or 8-1/2" x 14" paper in trays 2
to 4, remove divider plate. Move
divider plate all the way to the
paper feed opening (right side),
and pull up.
If the machine does not recognize
the paper size even though A4
size is correctly loaded in tray 1, or
8-1/2" x 14" size is correctly
loaded in trays 2 to 4, check if the
holder in the cassette is positioned
at A4 (8-1/2" x 14" in trays 2 to 4).
If the original has a fold, straighten the fold before
placing. (This prevents original misfeeds.)
If the original is stapled, be sure to remove the staples and
fan the pages well before placing. (This is to prevent
misfeeding and tearing of the original, and to prevent torn
fragments of the original from remaining in the feeder.)
●
Bypass tray
When loading paper, also
open the extension tray.
Adjust the bypass tray
guides so that they
slightly contact the
loaded paper.
5
Load the paper with the
print side facing down.
The paper must not exceed
the maximum number of
sheets and must not be
higher than the indicator line.
When setting 8-1/2" x 11" size
paper in tray 2 to 4, remove the 2
regulation plates with green color
on the front and back side of the
tray before setting the paper. The
plates are contained in the inside
storage space of the back side of
the tray.