For The Electrician - Scotsman MDT5N40A-1J Installation And User Manual

MDT5N25 & MDT5N40 User Manual

FOR THE ELECTRICIAN

CONFORM TO ALL APPLICABLE CODES
The electrical power to the unit is
supplied through the junction box at the
INDIVIDUAL CIRCUIT
rear of the machine.
FOR ICE DISPENSER
Check the nameplate (located on the
back panel) for the voltage
requirements, and for the minimum
circuit ampacity. The machine requires
a solid chassis to earth ground wire.
The ice maker should be connected to
its own electrical circuit so it is
individually fused. Voltage variation
must remain within design limitations,
even under starting conditions.
All external wiring must conform to
national, state, and local electrical
codes. The use of a licensed
electrician is required to perform the
electrical installation.
JUNCTION BOX
Internal to back panel on
some models
November 2008
Page 7