For The Electrician - Scotsman NM1852RH Manual

NM1852RH

FOR THE ELECTRICIAN

CONFORM TO ALL APPLICABLE CODES
Electrical Connections:
DETAIL OF
Locate the nameplate for the
JUNCTION BOX
current requirements, and then
determine the wire size and type
per the National Electric Code. The
machine requires a solid chassis to
earth ground wire. Refer to the
wiring diagram. The ice machine
should be connected to its own
JUNCTION
electrical circuit, and be individually
BOX
fused.
Voltage, when the unit is under full
POWER SUPPLY
load, must remain within the
limitations listed on page 2.
LOW VOLTAGE CAN CAUSE
EQUIPMENT MALFUNCTION
AND/OR DAMAGE
All external wiring should conform
to the National, State, and local
electrical codes. Usually the
services of a licensed electrician
will be required.
August 1992
Page 4