BMW R 1200 R 2007 Rider's Manual page 70

with OE Automatic Stability
5
Control (ASC):
The ASC warning light is
68
switched on together with the
general warning light in yellow.
Phase 2
General warning light
changes from yellow to red.
z
Phase 3
The pointers of the tachometer
and speedometer are run back.
At the same time, all switched-on
warning and indicator lights are
switched off consecutively in the
reverse order.
If a pointer has not been moved,
or if one of the specified warning
and indicator lights has not been
switched on:
If it was not possible to
switch on the warning
lights, possible malfunctions
cannot be indicated.
Watch all warning and indicator
lights on the display.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
The readiness for operation of
the BMW Motorrad Integral ABS
is checked by the self-diagnosis.
Self-diagnosis is performed au-
tomatically when you switch on
the ignition. To check the wheel
sensors, the motorcycle must
drive faster than 3 mph (5 km/h).
Phase 1
Checking the diagnosable
system components while
stopped.
ABS warning light flashes.
Possible country-specif-
ic version of ABS warning
light.
Phase 2
Checking wheel sensors while
starting off.
ABS warning light flashes.
OE
Possible country-specif-
ic version of ABS warning
light.
ABS self-diagnosis
completed
ABS warning light goes out.
If an ABS fault is indicated after
ABS self-diagnosis is completed:
Continued driving is possible. It
must be noted that neither the
ABS nor the integral function is
available.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably