Installing rear wheel
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Make sure that wheel centering
device and contact surfaces of
wheel hub are grease-free.
Insert rear wheel in hole for
wheel centering device.
Screw in screws 1 hand-tight
and tighten with torque.
Rear wheel on wheel car-
rier
Tightening sequence: Tight-
en diagonally
44 lb/ft (60 Nm)
Turn muffler to its initial posi-
tion.
Install screw 2 for muffler
bracket in rear footrest, but do
not tighten it yet.
8
105
z