BMW R 1200 R 2007 Rider's Manual page 117

Replacing front/rear turn
indicator bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screw 1.
Pull glass on screw connection
side out of mirror housing.
Remove bulb 2 from
light housing by turning it
counterclockwise.
Replace defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with OE Turn indicators, white:
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with OE Turn indicators, white:
RY10W / 12 V / 10 W
Install bulb 2 by turning clock-
wise in light housing.
8
115
z