Replacing brake and tail
light bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Switch off ignition.
Removing seat (
60)
Remove 3 screws 1.
Remove cover 2.
Remove screw 3.
Pull lamp housing out of hold-
ers 4 toward rear.
Remove bulb holder 5 from
housing by turning it counter-
clockwise.
Press bulb 6 into fitting 7 and
remove it by turning it counter-
clockwise.
8
113
z