Floor Level - Stokke Tripp Trapp User Manual

WARNING!
sliding out. Always use restraint system.
• Follow the manufacturers instructions
• Do not leave child unattended
• The Tripp Trapp® Baby Set™ should only be used with
the seat plate in the first groove from the top of the
chair.
• Always use the restraint system when the seat is in one
of the top 3 grooves
• The harness must always be used and correctly fitted –
most injuries from high chair are caused by falls
• Always keep child in view
• Stay in reach of your child.
• Do not use the chair unless all components are correct-
ly fitted and adjusted. Pay special attention to the seat
and foot plate – make sure these are properly fastened
before you put your child into the chair.
• Do not place the chair near an open fire or other sourc-
es of strong heat, such as electric bar fires, gas fires etc
due to the risk of fire.
• Always place the chair on a level stable surface and
make sure that the chair has space to slide backwards.
• Position the high chair away from solid structures and
benches to avoid injuries caused by falls and by access
to dangerous items.
• Position the high chair away from furniture, walls, hot
surfaces and liquids, window covering cords and
Footrest
Make sure the forward edge of the footrest NEVER exceeds
the front tip of the chair legs at floor level. This may cause
the chair to be unstable when a child climbs in and out of
the Tripp Trapp® chair.
✕
NEVER let your child play
around the Tripp Trapp®
chair if it is not in the
intended position for use.
When the footrest is positioned close to the metal rod,
there will be a small gap between the inside of the chair legs
and the metal rod. This is perfectly normal. Never try to use
excessive force to make the metal rod touch the side legs of
the chair as this can cause damage to the chair and/or make
it unstable.
Prevent serious injury or death from falls or
Table
Be aware of the risk that
a big frame under the
table top makes it easier for
children to push their legs
against the table and tilt
backwards. Also note that
Tripp Trapp® is designed for
dining tables 28-30" (72-
76cm) high.
Warning
Warning
electrical cords and position the high chair away from
furniture when the chair is not being used at a table
with a tray removed.
• Do not use any accessories or replacement parts not
manufactured by STOKKE®; this may affect your child's
safety.
• Do not use the chair if any part is broken, torn or miss-
ing.
• Do not use the chair before the child can sit up by itself.
• Do not elevate the high chair on any structure or table.
• Do not use the chair as a step stool.
• Do not use with a booster seat
• TRIPP TRAPP® is intended for use when your child is
capable of sitting upright unassisted (approximately 6
months)
• Front of footrest not to exceed front legs of chair at

floor level

• NEVER use the Tripp Trapp® chair without any glider.
• Remember to retighten all screws 2-3 weeks after as-
sembly of the chair. After that you should check on and
retighten the screws if necessary on a regular basis, e.g.
every second month. Keep the Allen key for future use,
but out of the childs reach.
• If the chair is used with a tray, the tray is not designed
to hold the child in the chair.
Rough surfaces (uneven floors ),
for instance rugs and tiles
To prevent the Tripp Trapp® chair from tilting when pushed
backwards, it has plastic gliders underneath the legs. Their
function is to enable the chair to slide backwards and return
to an upright position when pushed backwards. To make
sure that the gliders function as intended, the chair should
be placed on a surface enabling the chair to slide backwards.
Thus, the surface should be level, stable and with a certain
hardness. Uneven and/or rough surfaces, for instance some
tiled floors, and rugs/carpets that are soft or with long loose
ends, are generally unsuitable for chairs used by toddlers.
Although the Tripp Trapp® chair is recognized for its stability,
these conditions also apply here.
The gliders as well as the floor must be kept clean. To further
increase the backward stability of the Tripp Trapp® high-
chair, a replaceable, extended rear glider ("Extended Glider")
has been developed for the Tripp Trapp® highchair. For the
period when the chair is used with a harness and the Tripp
Trapp® Baby Set, we recommend that you always use it with
the Tripp Trapp® Extended Glider. This is especially important
if the chair is placed on a soft carpet and/or at a table where
the child can push against a frame underneath the tabletop
with its feet.
AU/NZ 11 11