Warnings & Important Information; Regulatory Information; Notice To Victorian Consumers; Warning About Hot Water - Rinnai REU-AM2626WDL Operation & Installation Manual

WARNINGS & IMPORTANT INFORMATION

REGULATORY INFORMATION

Your Rinnai Continuous Flow water heater has been certified by the Australian Gas Association.
The A.G.A. Certification Number is shown on the data plate.
This Appliance must be installed correctly by an authorised person� The installation of gas, water, and electricity
must conform to local regulations�
The installation must also comply with the instructions supplied by Rinnai�
All dimensions referred to in these instructions are in millimetres, unless otherwise specified.
Please keep this instruction booklet in a safe place for future reference�

Notice to Victorian Consumers

This appliance must be installed by a person licensed with the Plumbing Industry Commission�
Only a licensed person will have insurance protecting their workmanship�
So make sure you use a licensed person to install this appliance and ask for your Compliance Certificate. For
Further information contact the Plumbing Industry Commission on 1300 815 127�

WARNING ABOUT HOT WATER

Hot water can cause scalding. Those most at risk are children and disabled, elderly and
infirm persons. (65°C water can severely burn a child in half a second).
Rinnai have water heater models which limit the delivery temperature to 50°C which
significantly reduces the scald hazard. Temperature limiting devices may also be able to be
fitted. Contact Rinnai for further information.
Always test the water temperature before use, such as when filling a bath or basin or entering
a shower, to ensure it is suitable for the application and will not cause scald injury.
Always supervise children whenever they are in the bathroom or near other sources of hot
water. Ensure any hot water taps are closed firmly after use.
Rinnai 4 HW_CF OIM