F 0 Display Units, Switch Output Specifications And Diagnostic Information Selection Function - SMC Networks ISE70G-N02-L2 Operation Manual

■[F 0] Display units, switch output specifications and diagnostic information selection function
This setting is only available for models with the units selection function.
<Operation>
Press the UP or DOWN button in function selection mode to display [F 0].
Display unit setting
Press the UP or DOWN button to select the display unit.
∗: MPa/kPa can be selected if the product does not have the unit selection function.
Press the SET button to set.
Switching setting of switch output NPN/PNP specifications
The switch output of this product can be switched to NPN or PNP output in accordance with the
user device construction.
Press the UP or DOWN button to select switch output specification.
Press the SET button to set.
Press the SET button.
-27-
Move on to display unit setting.
Move on to the switch output NPN/PNP
specification switching setting.
Move to the setting of diagnostic information selection.
No.PS※※-OMV0004-H