Descaling; Descaling Procedure - Gaggia VELASCA PRESTIGE User Manual

English
14

Descaling

CALC CLEAN

Descaling procedure

CALC
CLEAN
4219_460_3729_1_booklet_A5_v1.indd 14
You have to descale the machine when the display shows the CALC
CLEAN icon.
If you do not descale when the display shows the CALC CLEAN
icon, the machine may stop working properly. In this case, repairs
are not covered by the warranty.
Never drink the water with descaling mixture that you pour into
the water tank or any water with residues that comes out of the
machine during the descaling procedure.
The descaling procedure lasts approximately 30 minutes. Only use
the Gaggia solution to descale the machine. The Gaggia descaling
solution is designed to ensure optimal performance of the machine.
You can pause the descaling or rinsing cycle by pressing the ESC
button. The display will show the following icon. To continue the
descaling or rinsing cycle, press the OK button.
1 Remove and empty the drip tray. Slide the drip tray back into
the machine.
2 Remove the water filter from the water tank (if present).
3 Fill the milk carafe with fresh water up to the MIN level. Turn the
dispensing spout of the milk carafe to the 'I' position. Insert the
milk carafe into the machine.
4 Press the OK button.
- The display shows the following icon to remind you have to
place the milk carafe in the machine.
5 The display shows the following icon to indicate that the
machine enters the descaling cycle. If you want to exit the
descaling cycle, press the ESC button.
6 Pour the entire bottle of Gaggia descaling solution (250ml) into
the water tank.
7 Add water to the descaling solution in the water tank up to the
CALC CLEAN indication.
14/02/17 08:58