Gaggia VELASCA PRESTIGE User Manual page 15

CALC
CLEAN
4219_460_3729_1_booklet_A5_v1.indd 15
8 Place a large container (1.5 l) under the coffee and milk
dispensing spouts.
9 Press the OK button to start the descaling cycle.
- The machine dispenses the entire descaling solution at regular
intervals through the coffee and milk dispensing spouts (this
takes approximately 25 minutes).
10 Wait until all of the descaling solution has been dispensed.
Remove and empty the container and the milk carafe.
11 Remove and empty the drip tray. Slide the drip tray back into
the machine.
12 Rinse the water tank and fill it with fresh water up to the CALC
CLEAN indication. Slide the water tank back into the machine.
13 Fill the milk carafe with fresh water up to the MIN level and
place it back into the machine. Place the container back under
both spouts.
14 Press the OK button to start the rinsing cycle (this takes
approximately 4 minutes).
- The display shows the following icon to indicate that the rinsing
cycle is finished.
15 Rinse the water tank and place the water filter back into the
water tank (if it was installed).
16 Fill the water tank with fresh water up to the MAX level. Slide
the water tank back into the machine.
17 Press the OK button to end the descaling cycle.
18 Place a container under the coffee and milk dispensing spouts.
19 The display shows the following icon to indicate that the
machine is heating up.
- The machine performs an automatic rinsing cycle.
20 Remove and clean the milk carafe see chapter 'Cleaning and
maintenance', section 'Weekly cleaning of the milk carafe'.
Insert the water dispensing spout into the machine.
21 Remove and empty the drip tray. Slide the drip tray back into
the machine.
22 Remove and rinse the brew group see chapter 'Cleaning and
maintenance', section 'Clean the brew group'.
The machine is now ready for use.
English
15
14/02/17 08:58