Detail Of Table Mode - Panasonic LP-ABR11 Setup And Operation Manual

4.4

Detail of Table Mode

Up to 8 tables can be used while the trigger is activated.
ENABLEDDMTBL=a (a: 1 to 8)
e.g.1) Use 3 tables (a=3)
Table #1, #2 and #3 are enabled and Table #4 through #8 will not be used. If the reader
successfully decodes a symbol with Table #1, Table #1 will be used in the next reading.
If the reader failed to decode a symbol with Table #1, the settings will switch to Table #2,
etc.
If the reader failed to decode with Table #3, the settings will switch back to Table #1.
e.g.2) Use 1 table (a=1)
Only Table #1 is enabled. Table #2 through #8 will not be used. As the result, Table #1
is always used every reading.
The following shows the structure of the Table. Each table has 9 types of parameters:
(1) DecodeArea
(2) Illumination Control
(3) Internal Illumination
(4) Illumination Intensity
(5) Shutter Speed
(6) Analog Gain
(7) Digital Gain
(8) Black Level Illumination
(9) Image Preprocessing
(10) Mirrored Image
[DDMcapmode]
[DDMlight]
[DDMled]
[DDMbrightness]
[DDMshutt]
[DDMgain]
[DDMexgain]
[DDMblack]
[DDMpreproc]
[DDMmirror]
46