Table of Contents
Advertisement
4
Section
Scan types
The transceiver has 4 scan types, a Tag function and 4
Resume options, for scanning versatility.
OPEN SCAN
#
ch 01
#
ch 40
#
ch 39
Repeatedly scans all tagged channels in sequence.
GROUP and PRIORITY SCAN
#
ch 02
#
ch 01
#
ch 10
#
ch 09
Repeatedly checks the preset Priority
channel after scanning 5 tagged channels.
Tagged channels are independently set for Open,
Group and Priority scans. All channels may be preset
as tagged channels for all scans.
REPEATER SCAN
#
Ch 01
Scan cancel
#
Ch 48
#
Ch 04
Scans all repeater channels (01 to 08 and 41 to 48)* in
sequence. If there are no busy channels after scanning
channels 01 to 08 and 41 to 48,* the scan begins from 01
again, and then the transceiver transmits a signal to
search for a repeater while scanning.
* Excludes emergency repeater 05.
SCAN
#
ch 02
ch 03
ch 04
#
#
ch 06
ch 05
#
#
ch 03
ch 04
#
ch 05
Priority
channel
#
ch 06
#
#
ch 08
ch 07
#
#
Ch 02
Ch 48
#
Ch 01
#
#
Ch 03
Ch 02
Scanning preparation
The IC-41PRO scans all tagged channels when a scan is
activated. When it detects a busy channel, the scan can
be set to pause, or to resume after a pause. (Except for
a Repeater scan).
• See page 6 for details on the Scan Restart function.
D Selecting a scan type
➥ Push
several times to select the desired scan type.
• Select Open, Group or Priority scan.
Open scan is selected.
Push
Group scan is selected.
Priority scan is selected.
D Setting a Tag channel
Before setting tag channels, you must select the desired
scan type, as described above.
NOTE: All channels for each scan type are tagged by
default. To select the channels to scan, you must first
untag the undesired channels.
q Select the desired scan type.
w Rotate [ROTARY SELECTOR] to select the undesired
channel.
e Hold down
for 2 seconds to untag the selected
channel.
• "S" disappears when the tag setting is OFF.
Displayed
r Repeat steps q to e until all the undesired channels
are untagged.
To tag
q Rotate [ROTARY SELECTOR] to select an untagged
channel.
w Hold down
for 2 seconds to tag the selected
channel.
• "S" is displayed when the selected channel is tagged.
8
Displayed
Push
Displayed
Displayed
Push
Disappears
Hide quick links:
Advertisement
Table of Contents
