Lower Leg Support, Model 2.370; Footplates; Footboard - Meyra 2.360 Operating Manual

Lower leg support, model 2.370

The footplates, resp. footboard needs to be
folded up before entry or exit [1].
☞ Check the locking points!
– Remove both feet from the footplates.
– Remove lower calf belt, if present.
☞ Therefore observe chapter Calf belt
model 2.370, on page 14.
☞ Before starting to drive the footplates
resp. footboard need to be folded back
down [3] and the calf belt attached.

Footplates

The footplates can be folded outward and
up [1] resp. inward and down [3].

Footboard

Fold the footboard up before swivelling
away and removing the upper leg support
[4].
Folding up the footboard
In order to fold up the footboard lift the
loose end of the footboard as far as possible
[4].
Folding the footboard down
In order to fold down the footboard, lower
the loose end of the footboard as far as pos-
sible down onto the footboard bracket [5].
16
1
3
4
5