Changing A Monitor Parameter; Inserting Batteries Into The Remote - Interlogix TruVision TVM-2202 User Manual

R1 POWER
Turns the monitor on from stand-by or
off to stand-by mode.
R2 TV/AV (input source)
Selects the signal source from multiple
input sources.
R3 MUTE
Turns the sound on and off.
R4 NUMBER Buttons
Press the number buttons in order of
7,8,9,0 to unlock the keypad lock.
R5 LAST CH
Not used.
R6 INFO
Information display.
R7 PICT MODE
Selects preferred picture settings.
R8 SLEEP
Set the sleep timer.
R9 MENU
Display a main menu.
R10 EXIT
Turns the OSD window off and moves
from submenu to top menu in the OSD
window.
R11/R17 UP/DOWN ▲/▼ Buttons
Press UP/DOWN buttons to enter the
Function menu.
R12 / R14 LEFT/RIGHT ◀/▶ Buttons
Press LEFT/RIGHT button to adjust the
Function menu.
R13 OK
Selects menu items.
R15 VOL +/-
Adjust the sound level.
R16 PR +/-
Not used.
R18 ADD/ERASE
Not used.
R19 PC
Directly select VGA mode.
6
R20 AIR/CABLE
Not used.
R21 CC
Not used.

Inserting batteries into the remote

control
Open the battery compartment of the remote
control. Insert the batteries (two 1.5 V type
R03 or AAA). Make sure that the polarity
matches with the (+) and (-) marks inside of
the battery compartment.
Note: To avoid damage from possible battery
leakage, remove the batteries when not using
the remote control handset for an extended
period of time.
Changing a monitor
parameter
TVM-2002/2202/2402/2702/3202/4002:
1. Press the MENU
panel to obtain the OSD menu screen.
2. Use the ◀/▶ or ▲/▼buttons to select
the menu.
3. Use the AUTO
submenus.
4. Use the ◀/▶ or ▲/▼ buttons to select a
submenu function.
5. Press the AUTO
adjustments as necessary using the
◀/▶ or ▲/▼ buttons.
6. To exit, press MENU.
TVM-2212:
1. Press the MENU
panel to obtain the OSD menu screen.
2. Use the ◀/▶ buttons to select the
menu.
TruVision Monitor User Manual
button on the front
button to select the
button, then make
button on the front