Related Manuals for Interlogix TruVision TVM-2202
Summary of Contents for Interlogix TruVision TVM-2202
-
Page 1: User Manual
TruVision TVM-2002 / 2202 / 2212 2402 / 2702 / 3202 / 4002 Monitors User Manual P/N 1073347-EN • REV A • ISS 30JAN18... - Page 2 © 2018 United Technologies Corporation This product complies with the applicable harmonized European standards listed under the EMC Directive Interlogix is part of UTC Climate, Controls & Security, a unit of 2014/30/EU, the RoHS Directive 2011/65/EU. United Technologies Corporation. All rights reserved.
-
Page 3: Table Of Contents
Content Important safeguards Installation cautions: • Do not block any ventilation Important safeguards 1 openings. Introduction 2 • Always ensure that the monitor is Features 2 located in a well-ventilated area to prevent the unit from overheating. Assembling the monitor 3 •... -
Page 4: Introduction
Lightning: For added protection during a packing materials so that the monitor can be lighting storm or when this unit is left properly stored or transported. unattended and unused for long periods of time, unplug the unit from the wall Features outlet and disconnect the cable system. -
Page 5: Assembling The Monitor
Assembling the monitor TVM-2402/2702 models The monitors are designed for use on a desktop. The arm of the monitor stand is shipped pre- installed on the monitor. To assemble the monitor: TVM-3202/4002 models Put a smooth pad or cloth on a level surface. -
Page 6: Attaching The Monitor Mount
TVM-2002 model The monitor’s installation surface is compatible with other types of VESA standard TVM-2202/2212 models stands. Hole spacing: 100 x 100 mm Screw length: 8 to12 mm Connections TVM-2402/2702 models AC Input AUDIO IN Audio signal input. CAM IN (not available on TVM-2212) Composite signal input. -
Page 7: Control Panel
Control panel Secondary Function: Moves the cursor to the right in the OSD window and increases the value of any selected TVM-2002/2202/2212/2402/2702 menu item. AUTO Primary Function: Automatically adjusts the display to the most optimal setting possible. (VGA mode only) Secondary Function: Selects the submenu. -
Page 8: Changing A Monitor Parameter
POWER R20 AIR/CABLE Turns the monitor on from stand-by or Not used. off to stand-by mode. R21 CC TV/AV (input source) Not used. Selects the signal source from multiple input sources. Inserting batteries into the remote control MUTE Turns the sound on and off. Open the battery compartment of the remote control. -
Page 9: Hot Keys
Adjustment procedure With a menu selected use the MENU button to select the submenus. Use the ◀/▶ buttons to select a submenu function. Press the MENU button, then make adjustments as necessary using the ◀/▶ buttons. To exit, press AUTO. Hot keys When the OSD does not appear ▶/▲... -
Page 10: Vga Menu
VGA menu 4-3 DCR Not used. Picture 4-4 DCC Not used. 4-5 H-Position Not used. 4-6 H-Size Not used. 4-7 V-Position Not used. 4-6 V-Size Not used. Brightness Adjust the brightness of the image. (VGA Setting) Contrast Adjust the contrast of the image (the difference between light and dark areas on the screen). - Page 11 System 5-5 Clock Adjust the width (horizontal size) of the screen image to fine tune the display. Sound Menu Language Select the OSD language. Screen Format Select the aspect ratio. Sound Mode (16:9/4:3/ZOOM1/ZOOM2) Choose a different preset sound mode or a customized sound (Standard/Speech/ OSD Time out Music/User).
-
Page 12: Cam Menu (Hdmi/Bnc)
Time Setting CAM menu (HDMI/BNC) 7-1 Time Picture Not used. 7-2 Sleep Timer Set the sleep timer. 7-3 Auto Sleep The monitor turns off when it does not receive any signal from the remote control or any button within the time set up (Off/1 Hour/2 Hours/5 Hours). - Page 13 Sound (Advanced Setting) Sound Mode Advanced Setting Choose a different preset sound mode or 8-1 Noise Reduction a customized sound. Reduce the noise in the picture due to (Standard/Movie/Music/User) poor reception or poor picture quality. (Off/Low/Middle/High). Balance 8-2 Back Light Adjust the sound balance of the left and right speakers.
-
Page 14: Hdmi/Vga Menu
Menu Language (An on-screen warning appears before the configured automatic shutdown Selects the OSD language. time). Screen Format Memory Recall Selects the aspect ratio Reset the screen to the factory preset (16:9/4:3/ZOOM1/ZOOM2/FULL(CAM display settings. mode only)). OSD Time out Lock Adjust the display time of the OSD menu (10 to 60 seconds). - Page 15 OSD menu Brightness Adjust the brightness of the image. Color Temp. Adjust the color temperature (Red/Green/Blue). Options are 9300K, 6500K, 5500K, and USER defined. Auto Adjust Adjust the clock, phase, and position automatically (VGA mode only). Language Color Adjust Selects the OSD language. Adjust the color of the image (VGA mode OSD H.
-
Page 16: Self-Diagnosis
Signal Source The Out of Range screen appears when the applied frequency is under or over normal Selects VGA or HDMI signals. range. Aspect Ratio Normal range (non-interlaced mode only): Selects the aspect ratio H: 30 to 80 kHz (16:9/AUTO/4:3). V: 56 to 77 Hz The dynamic contrast ratio (DCR) automatically adjusts the screen... - Page 17 Issue Solution Image is Check if the signal cable unstable is suitable to the video card. Image is not Adjust Clock H&V centered, too Center to get the proper small, or too image. large Picture Keep the devices that bounces or a may cause electrical wave pattern interference away from...
-
Page 18: Specifications
Specifications TVM-2002/2202/2212/2402 models TVM-2002 TVM-2202 TVM-2212 TVM-2402 Panel (size and 19.53” LED 21.5” LED 21.5” LED 23.6” LED backlit type) backlit backlit backlit Pixel Pitch 0.2265(H) 0.24825(H) x 0.24825(H) x 0.2715(H) x (mm) x0.221(V) 0.24825(V) 0.24825(V) 0.2715(V) Aspect Ratio 16:9 16:9 16:9 16:9... - Page 19 TVM-2002 TVM-2202 TVM-2212 TVM-2402 Video In/Out (BNC) VGA In (15 Pin D-Sub) HDMI Stereo Audio In (3.5 mm jack) Operations Power, Left, Power, Left, Power, Left, Power, Left, Control Right, Auto, Right, Auto, Right, Auto, Right, Auto, Menu Menu Menu Menu OSD Language English,...
-
Page 20: Tvm-2702/3202/4002 Models
TVM-2002 TVM-2202 TVM-2212 TVM-2402 Dimension W x 517 × 127 564 × 436 564 × 436 614 × 445 H x D (box) × 343 mm × 144 mm × 144 mm × 109 mm (20 × 5 (22 × 17 (22 ×... - Page 21 TVM-2702 TVM-3202 TVM-4002 Viewing Angle 170°/160° 178°/178° 178°/178° (H/V) Contrast Ratio 1000:1 1000:1 5000:1 Response Time 5 ms 8 ms 9.5 ms Brightness 300 cd/㎡ 300 cd/㎡ 360 cd/㎡ Recommended 1920 × 1080 @ 60 Hz 1920 × 1080 @ 60 Hz 1920 ×...
- Page 22 TVM-2702 TVM-3202 TVM-4002 OSD Language English, French, English, French, English, French, Spanish, German, Spanish, German, Spanish, German, Italian Italian Italian Remote control Power < 40 W < 45 W < 60 W Consumption Input Voltage 100 ~ 240 VAC 100 ~ 240 VAC 100 ~ 240 VAC Filter Type 3D Comb filter, De-...
-
Page 23: Factory Preset Timings
The specifications can change without notice. The panel may have some defective pixels (pixels that are slightly lighter or darker, for example) due to a characteristic of the panel. But there is no defect in the product itself. Factory preset timings Horizontal Vertical Freq. - Page 24 TruVision Monitor User Manual...