Related Manuals for Interlogix TVM-2700
Summary of Contents for Interlogix TVM-2700
- Page 1 TVM-2700 / TVM-3200 / TVM-4200 Monitor User Manual P/N 1072765C-EN • REV 1.0 • ISS 05MAY14...
- Page 2 2004/108/EC (EMC directive): Hereby, UTC Fire & Security declares that this device is in compliance with the essential Interlogix is part of UTC Building & Industrial Systems, a unit of requirements and other relevant provisions of Directive United Technologies Corporation. All rights reserved.
-
Page 3: Table Of Contents
Pay particular Specifications 13 attention to the location of cords and plugs, convenience receptacles, and the TVM-2700 / TVM-3200 models 13 point of exit from the appliance. TVM-4200 model 14 Product care: Do not touch the screen Factory preset timings 16 directly with fingers. -
Page 4: Introduction
Features Lightning: For added protection during a lighting storm or when this unit is left unattended and unused for long periods The convenient and user-friendly on- of time, unplug the unit from the wall screen display allows for easy and outlet and disconnect the cable system. -
Page 5: Front Panel Controls
▲ CAM2 R/L Up Arrow (*) Audio signal input left and right for CAM2 Primary Function: Automatically adjusts the display to the most optimal setting CAM2 In/OUT possible. (VGA mode only) Composite signal input and output for CAM2 Secondary Function: Allows for vertical scrolling in the OSD menu. -
Page 6: Hot Keys
Hot keys MUTE Turn the sound on and off. Selects signal in order. SOURCE VGA - HDMI - DVI – CAM1 NUMBER Buttons – CAM2 - SVIDEO Press the number buttons in order of 7,8,9,0 to unlock the keypad lock. When there is no OSD, if ▲... -
Page 7: Adjustment Procedure
Adjustment procedure Not used. R22 POSITION Not used. R23 ZOOM Select the screen format (CAM/HDMI mode only). R24 SIZE Not used. R25 SKIP Not used. R26 PIP Not used. R27 S. SWAP Not used. R28 SOURCE Not used. R29 P. SWAP Not used. -
Page 8: Advanced Settings
(Advanced Settings) 4-3 DCR (optional) The dynamic contrast ratio (DCR) automatically adjusts the screen brightness. Turn DCR on or off. 4-4 DCC (optional) The dynamic contrast control (DCC) automatically adjusts the screen contrast. Turns DCC on or off. VGA Setting 5-1 Auto adjust Automatically choose the correct (VGA setting) - Page 9 Balance Screen Format Adjust the sound balance of the left and Select the aspect ratio (16:9/4:3). right speakers. OSD Time out Bass (optional) Adjust the display of the OSD menu (5 to When you select User mode, adjust the 60 seconds). bass sound.
-
Page 10: Cam Menu (Dvi/ Hdmicam/ S- Video)
Keypad Lock Sharpness Turn the keypad lock on or off. Adjust the image quality of the display. (DVI mode is not available). Remote Control Lock (optional) Turn the remote control lock on or off. Tint (cam mode only) Adjust the tint of the image. Cam menu (DVI/ HDMICAM/ S- Color Tone VIDEO) - Page 11 Sound (Time Setting) Menu Language Sound Mode Select the OSD language. Choose a different preset sound mode or your own customized sound. (Standard/ Screen Format Movie/ Music/ User) Select the aspect ratio (16:9/4:3/ ZOOM1/ ZOOM2/ FULL(HDMI mode Balance only)). Adjust the sound balance of the left and right speakers.
-
Page 12: Self-Diagnosis
Memory Recall Reset the screen to the factory preset display settings. Press any key to cancel. Lock Monitor is turned off when it does not receive any signal from the remote control or any button within the time that set up. Removing the monitor stand (All models) Turn off the monitor and unplug the... -
Page 13: Troubleshooting
Model Specifications Check if the pins of the D sub-connector are not TVM-2700 VESA standard: 100 x bent. 100 mm and 200 x 100 mm Check if the computer is in (3.94 x 3.94 in. and 7.87 x the power- saving mode. - Page 14 Symptom Check Adjust the volume of the sound card in the computer. VIDEO screen Check if PICTURE mode cannot be seen has been set. Check if the video terminal is properly connected. No video Check if the video cable is correctly connected to the computer and set to Functions...
-
Page 15: Specifications
Specifications TVM-2700 / TVM-3200 models Items TVM-2700 TVM-3200 Panel Screen size 27 in. (68.6 cm) 32 in. (81.3 cm) Pixel pitch 0.31125 x 0.31125 0.36375 x 0.36375 View angle (H/V) 178°/178° 178°/178° Contrast ratio 3000:1 (typ) 3000:1 (typ) Response time... -
Page 16: Tvm-4200 Model
Items TVM-2700 TVM-3200 25.35 x 16.85 x 7.87 29.17 x 19.33 x 7.87 W x H x D (box) 749 x 542 x 276 mm 887 x 654 x 293 mm 29.49 x 21.34 x 10.87 34.92 x 25.74 x 11.54 in. - Page 17 Items TVM-4200 model Interface VGA in (15 Pin D-Sub) DVI in HDMI in CAM in/out Audio in (RCA type) S-Video in/out PC stereo in Head phone out Transmitter Remote control Power Consumption < 90 W Source 90 to 260 VAC Special feature Filter type 3D comb filter, De-interlacing...
-
Page 18: Factory Preset Timings
Factory preset timings Pixel Format Horizontal Vertical Freq.(Hz) Remark Freq.(KHz) 720 x 400 31.469 70.087 all models 640 x 480 31.469 59.940 all models 640 x 480 37.861 72.809 all models 640 x 480 37.500 75.000 all models 800 x 600 37.870 60.317 all models...