Page 3
European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. Contact www.interlogix.com information...
Important safeguards 1. Installation cautions: • Do not block any ventilation openings. • Always ensure that the monitor is located in a well-ventilated area to prevent the unit from overheating. • Only use accessories specified by the manufacturer or those sold with the product.
• Always remember to unplug the monitor from the power supply under the following circumstances if the monitor will not be used for a long period of time, if the power supply cable or plug/connector is damaged or if the monitor housing is damaged or broken.
• Air bubbles may develop within the glass screen if these recommendations are not observed. Product dimensions (mm) Operating instructions Figure 1: I/O connectors on the rear panel No. Connector Description Connect to a RGB input terminal, such as the display card output DVI terminal of the personal computer.
Page 8
Figure 2: Front panel controls MENU In live mode, press to access the OSD menus In menu mode, press to increase the value of the OSD menu option selected. In live mode, press to increase volume. In menu mode, press to decrease the value of the OSD menu option selected.
OSD configuration Configure the monitor using the onscreen display (OSD) menus and submenus. Changes are immediately saved and implemented. The menu screen timeouts after 10 seconds and returns to live mode. To change a monitor parameter: 1. Press the MENU button on the front panel to obtain the OSD menu screen and toolbar.
Page 10
6500K: Selects normal temperature (Comprehensive color). 5800K: Selects warm color temperature (Yellow bias). SRGB: Special application for computer source (R=G=B=128) that setting would be display true color faithfully. User: Customizes the red, green and blue gain levels. Exit: Return to live mode. Image Auto Adjust: Automatic adjustment for optimal image parameters.
OSD H. Pos.: Adjusts the horizontal position of the OSD area. Setting values range from 0 to 100. Default is 50. OSD V. Pos.: Adjusts the vertical position of the OSD area. Setting values range from 0 to 100. Default is 50. OSD Timer: Adjusts the OSD appearance time (unit is seconds).
Page 12
Model 17” 19” Viewing angle Left 80°/Right 80°/ Left 85°/Right 85°/ Up 80°/Down 80° Up 85°/Down 85° Response time 5 ms (TYP*) Input voltage 96 to 256 VAC, 60 Hz/ 50 Hz VGA input 15pin D-SUB connector x 1 Audio input 3.5 mm stereo jack Speaker 1 W + 1 W...