Interlogix TruVision TVM-2202 User Manual page 17

Issue Solution
Image is Check if the signal cable
unstable is suitable to the video
card.
Image is not Adjust
centered, too Center
small, or too image.
large
Picture Keep the devices that
bounces or a may cause electrical
wave pattern interference away from
is present in the monitor.
the picture
See the FCC
information in the front
of the manual.
Picture is Adjust
blurred Brightness.
No sound Check the audio cables
are correctly connected
to the computer.
Adjust the volume after
checking the sound is
muted.
Check the audio system
in the computer.
Low sound Adjust the volume on
the OSD menu.
Adjust the volume of the
sound card in the
computer.
VIDEO screen Check if PICTURE
cannot be mode has been set.
seen
Check if the video
terminal is properly
connected.
Poor color in Adjust the
the video values on the OSD
Picture menu.
Grainy picture Adjust the
in the video on the OSD Picture
menu.
TruVision Monitor User Manual
Clock or H&V
to get the proper
Contrast and
Color or Tint
Sharpness
15