RCA Pro942 User Manual page 63

Optional Accessories
CRF81 RF Output Adapter
This adapter is used to connect your
camcorder to a standard TV (one without
audio/video input jacks) for playback. If
your antenna cable is the flat twin-lead
type attached by two screws, you will also
need a 300-75 ohm transformer, such as
193983. If your TV has 300-ohm VHF
screw terminals, you will need an optional
75-300 ohm transformer, such as AH011.
VAA009 Audio/Video Input Cable
This audio/video input cable will enable
you to use your camcorder to record from
other devices which have audio/video
output jacks (such as another VCR,
camcorder, or TV monitor). This makes
it convenient to copy tapes or record a
television broadcast. The VAA009's plug
is specially designed so other cables and
accessories can be plugged into the
camcorder at the same time.
AH25 Y-Adapter
This Y-adapter allows you to connect
your camcorder's mono audio cable to a
stereo TV or VCR.
AVS80 Synchro Edit Cable
This cable attaches to the camcorder to
provide video and audio outputs for
dubbing, or for direct input to a monitor
receiver. It can also control the start/stop
functions of a VCR with a compatible
2.5mm PAUSE, EDIT, EDIT IN, EDIT
IN/OUT, or SYNC jack when copying a
tape.
193983 Cable Transformer
The 193983 is used to connect a standard
300-ohm antenna twin-lead to a standard
round 75-ohm connector on the RF output
adapter, a VCR, or TV.
AH011 Cable Transformer
The AH011 is used to connect a standard
round 75-ohm antenna cable to the
300-ohm screw terminals on a TV.
All specifications and descriptions of
accessories are subject to change
without notice.
61