Synchro Edit - RCA Pro942 User Manual

Synchro Edit

Synchro edit allows your camcorder to control a VCR (one that has a compatible
PAUSE, EDIT, EDIT IN/OUT, or SYNC jack) while tapes are being copied from
the camcorder to the VCR. This is convenient when you want to copy only
selected segments from a previously recorded tape. An optional AVS80 synchro
edit cable shown on page 61 is required.
Note: Not all RCA VCRs have compatible synchro edit jacks.
Optional AVS80 Synchro Edit
Output Cable
AUDIO
VIDEO
IN
R L
Back of VCR
Caution: The unauthorized recording of copyrighted material may
infringe the rights of others. Such recordings should not be made.
44
PLAY Button
REW Button
F.F Button
STOP Button
Audio/Video In/Out Connector
(Located behind small cover)
Compatibility
Switch
Note: If your VCR has a single
(mono) AUDIO IN jack, connect
EDIT
IN
either the left or right audio plug.
CAM/OFF/VCR Switch
Thumb
Trigger