Inserting And Removing - RCA Pro942 User Manual

Powering Your Camcorder
Using the Rechargeable Battery to Power Your Camcorder
Insert the Battery
1. Make sure the CAM/OFF/VCR switch
is in OFF.
2. Lift the OPEN lever and pull up the
battery compartment cover.
3. Insert the battery into the battery
compartment aligning the reference
marks.
4. Press and hold the battery while
sliding it in the direction of the arrow.
Remove the Battery
1. Make sure the CAM/OFF/VCR switch
is in OFF.
2. Lift the OPEN lever and pull up the
battery compartment cover.
3. Slide the battery in the direction of the
arrow until you hear a click.
14
5. Close the battery compartment cover.
Hold the OPEN lever and align the
tabs on the cover with the tabs on the
compartment.
OPEN Lever
Reference
Notes: The OPEN lever must be open for
Marks
the cover to close.
Remove the battery from the camcorder
when not in use.
4. Remove the battery from the
compartment
5. Close the battery compartment cover.
Hold the OPEN lever and align the
tabs on the cover with the tabs on the
compartment.
Tabs