Synchro Edit - RCA Pro942 User Manual

Synchro Edit

REW F.FWD
REW Button
STOP PLAY
STOP Button
A/V DUB PAUSE
DISPLAY RECORD
T
ZOOM
RESET
W
TITLE S.EDIT
ON
OFF
To Synchro Edit
1. Connect your camcorder to a
compatible VCR as shown.
2. Prepare the camcorder to play back
the tape you want to copy.
• Slide the CAM/OFF/VCR switch to
VCR.
• Insert the tape you want to copy.
• Press PLAY.
• Press the thumb trigger (PAUSE/
RECORD on remote) to place the
camcorder in play pause.
3. Prepare the VCR to record.
• Turn on the VCR.
• Insert a blank tape into VCR.
• Press RECORD to put VCR in record
pause.
Note: If the VCR begins to record
instead of pausing – stop the VCR,
change the compatibility switch on the
AVS80 cable, and press RECORD on the
VCR again.
4. Press S.EDIT on the remote to start the
camcorder playing and the VCR
F.FWD recording.
Button
Note: Pressing S.EDIT puts the
camcorder in review for several seconds
PLAY Button
and then into playback.
5. Pressing REW, F.FWD, STOP, or
PAUSE/
RECORD
thumb trigger (PAUSE/RECORD on
Button
remote) automatically puts the VCR
into record pause. This allows you to
search (forward or backward) or fast-
S.(Synchro) EDIT
forward or rewind the tape in the
Button
camcorder without disturbing the tape
in the VCR.
• To search forward (or backward),
press F.F (F.FWD on remote) or
REW. Press PLAY to resume normal
playback. To begin copying again,
press the thumb trigger (PAUSE/
RECORD on remote) and then press
S.EDIT on remote.
• To fast-forward or rewind the tape,
press STOP then F.F (F.FWD on
remote) or REW. To begin copying
again, press STOP, then PLAY, then
the thumb trigger (PAUSE/RECORD
on remote). Then press S.EDIT on
remote to begin copying.
6. If you want to stop copying the tape at
a certain point, turn on the
camcorder's memory-stop feature, and
set the camcorder's time counter to
"0:00:00M" at the point on the tape
where you want to stop copying.
When the camcorder reaches
"0:00:00M" on the tape, it will
automatically place the VCR in record
pause.
45