Attach The Adapter/Charger; Insert A Cassette - RCA Pro942 User Manual

First-Time Operation

2. Attach the adapter/charger.

DC IN 6V Jack on Side
of Camcorder
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger.
• Attach one end of the adapter/
charger's DC cable to the DC
OUTPUT jack on the adapter/
charger.
• Attach the other end of the cable to
the DC IN 6V jack on the camcorder.

3. Insert a cassette.

Cassette Door
PUSH Here
A. Slide EJECT to open the cassette
compartment.
B. Fully insert cassette with tape
window and safety tab facing out.
4
Adapter/Charger's
DC Cable
DC OUTPUT
Jack
POWER Indicator
• Plug the adapter/charger's plug into
an operating outlet.
• Details are on page 12.
Notes: Details on using the rechargeable
battery are on page 14.
You can also use six alkaline "AA"
batteries to power the camcorder. Details
are on page 16.
EJECT Switch
Safety Tab
Tape Window
C. Gently close compartment door by
pressing on the area labeled PUSH
until the door clicks into place.
Details are on page 21.
Adapter/Charger
To AC 100-240V,
50/60 Hz.