Appendix; Access Point Pinouts - Cisco AIR-AP1572IC Hardware Installation Manual

Access Point Pinouts

This appendix describes the pin signals of the access point Ethernet connectors, and the power injector
input and output connectors.
Table E-1
Table E-1
Pin Number
1
2
3
6
4
5
7
8
Shield
Table E-2
this table are applicable to AIR-POWERINJ1500. Not all PoE power sources follow these pinouts.
Table E-2
Pin Number
1
2
3
6
4
5
OL-32138-01
describes the pin signals of the access point LAN connector
Access Point LAN Connector Pinouts
Signal Name
Ethernet signal pair (10/100/1000BASE-T)
Ethernet signal pair (10/100/1000BASE-T)
Ethernet signal pair (10/100/1000BASE-T)
Ethernet signal pair (10/100/1000BASE-T)
Chassis ground
describes the pin signals for the access point PoE-in Ethernet connector. The Pinouts given in
Access Point PoE-In Ethernet Connector Pinouts for AIR-POWERINJ1500
Signal Name
Ethernet signal pair (10/100/1000BASE-T) and DC return
Ethernet signal pair (10/100/1000BASE-T) and DC (+)
Ethernet signal pair (1000BASE-T) and DC (+)
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
A P P E N D I X
E
E-1