Chapter 2
Installing the Access Point
Figure 2-21
1
Securing screws
2
Wire opening for ground (DC return)
Insert the two-position terminal strip into the DC power opening in the access point case, and carefully
Step 8
push the terminal strip into the internal connector (see
Note
OL-32138-01
Two-Position Terminal Strip
Ensure that the polarity of the terminal strip properly matches the polarity markings on the
enclosure (see
Figure
2-23)
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
3
Wire opening for DC +
Figure
2-22).
Powering the Access Point
2-35