ABB 2CSYK1102C/S Product Manual page 11

MYLOS Building Automation
®
Options:
- Unchanged contact
- Open contact
- Closed contact
Switching object value upon bus voltage restoration
With this parameter you can affect the output upon bus voltage restoration using the "Switching" object value.
The "Switching" object can be written with '0' or '1' when bus voltage is restored. The contact position is determined
again and the device parametrisation function is set.
Courtesy light activation
Selecting "Yes" courtesy lights are activated
LED operating mode
It is possible to adjust the status of LEDs to that of the relay ("Show relay status"), to the "LED" communication
object value ("Show communication object value") or to keep them always on or always off ("Always on" "Always
off" respectively).
Commissioning
MYLOS Building Automation | Commissioning 11
®